Es

ES

Motor-driven pump designed to be fully immersed in liquid
Screed pole type electric motor
Winding insulation CLF and resin coated
Degree of protection: IP. x 8
Thermal overload cut-out incorporated
AISI 420 stainless steel tempered shaft
Motor running on self-lubricating (long-life) CW bearings in semi-rigid supports: Almost total absorption of vibrations and noise
Double lip seal treated with special anti-friction lubricant
Water outlet adjustable by 360°
Anti-block filter on suction
Power cable length: 2 metres
Part of the pump made of thermoplastic material, resistant to high temperature

It is strictly forbidden to use flammable liquids
Before you connect the electric pump, always check the voltage and frequency on the ratings plate
Connect the earth cable to the electrical safety systems before connecting to the mains
The pump won’t be damaged by partially or totally closing the inlet pipe
We can supply motors with input voltages and frequencies that meet the specific requirements of the customer

Submersible pump designed to be fully immersed in liquid
Electric motor of the shielded pole type
Insulation winding CL F and resin
IP protection degrees x 8
Built-in thermal motor protection
Tempered stainless steel AISI 420 shaft
Motor supported by self-lubricating CW bearings (long-lite) in semi-rigid supports: almost total absorption of vibrations and noise
Double-lip seal treated with special anti-friction lubricant
360-degree adjustable water outlet
Anti-clogging filter in suction
Power cable length: 2 meters
Pump part in high-temperature resistant thermoplastic material

It is strictly forbidden to use flammable liquids
Before connecting the pump, always check the voltage and frequency on the label
Connect the ground wire to the electrical protection devices before connecting to the mains
The pump will not be damaged by partially or completely closing the outlet pipe
Motors with voltages and frequencies can be provided according to the specific needs of the customer